Transmission Repair Specialists in West Jordan, Utah
Is your vehicle experiencing transmission troubles? We're transmission repair geniuses! We guarantee we can fix your transmission and get you up and running in no time.READ MORE -
A car heating system may seem mystifying, with all its working parts integrated into such a much larger system. But, the heating system is actually relatively simple-seeming when compared to other subsystems of a vehicle. Still, the heater can develop a range of problems that can cause your car’s cabin not to heat properly. With the car heater not working, it can be too uncomfortable to use the car in cold weather, and a minor or major car heater repair may be needed. Below is a list of some of the most common causes of a car heater not working properly.
A vehicle’s heating system consists of the heater core, fan, engine coolant system, and the heating and air conditioning setting controls in the dashboard. The process is pretty straightforward. When hot coolant enters the heater core, the heater fan, directed by the control settings you have set on the dashboard, blows the heat into the car’s cabin. This happens while the coolant is in a cooled state and is returning to the engine.
If you have a problem with your car’s heating system, your auto repair technician will probably explore some of the most likely causes based on how the heating system is behaving. Some possible problems include:
If the heater fan is broken or has a short, hot coolant (antifreeze) may be reaching the heater core, but heat may still not be blowing into the cabin of the vehicle.
A radiator leak can stop the coolant from going to the car’s heater core to generate heat for the cabin of the car. This can damage your engine too, preventing sufficient engine cooling.
This is one of the top two most common causes of lack of heat coming into the cabin of a vehicle from the heating system. It happens when the coolant level is low so the hot fluid cannot get to the heater core due to overworking the engine or not putting the correct amount of coolant in the radiator.
When a broken or malfunctioning thermostat is the single most frequent cause of automobile heating systems suddenly failing to heat properly. A thermostat may become stuck closed or open, or develop other problems causing the heating and cooling system to stop producing.
A problem with the car’s electrical system can cause many different types of problems in many areas of the vehicle’s overall operations, including the car heating and air conditioning system. If the heater is not blowing out any air at all or the temperature setting cannot be adjusted, then it may be due to something wrong in the electrical system.
If you are experiencing problems setting the fan speed in your car or air is not coming out of the vents when you set the heat/AC controls to blow air, the blower motor resistor may be broken.
The vehicle’s wiring may have a short or is possibly broken, preventing the necessary triggering of the heater from occurring when the driver sets the controls to turn on the heat.
The AC/Heater dials, knobs, buttons, or touchscreen commands may not be connecting with the heating system parts as necessary to trigger the heater to work properly.
A less common problem is having particles in the cooling system that have made their way into the heater core and caused a buildup until it is clogged. If a radiator is rusting inside or debris travels through the radiator and becomes caught in the heater core. This requires a large repair.
Ace Auto provides among the Salt Lake area’s best auto repair services, including heating and air conditioning services. All Ace mechanics are ASE Certified. All of our auto repair services are guaranteed.
According to Consumer Reports data, customers typically express greater satisfaction with independent auto maintenance and repair shops compared to car dealerships. That’s likely to be largely because the greatest value for your dollar is most often at a high-quality, independent auto maintenance and repair facility. Unless your car’s warranty stipulates the facility where covered repairs must be performed, you are free to have your vehicle serviced wherever you wish. But, which automotive mechanic near you is best?
Auto repairs can be simple, like replacing a thermostat or brake pads. Or, they can be complex, like rebuilding an engine or transmission. Whatever your needs, you naturally want highly skilled and honest car mechanics working on your vehicle. Here are some helpful tips for finding a good, reliable, reasonably priced auto repair shop:
Auto service facilities are among the BBB’s most common generators of customer complaints. So, be sure to do your research at www.bbb.org to learn about shops you should avoid.
Ask for verification that each car mechanic and the repair shop are certified by the National Institute for Automotive Service Excellence (ASE).
Ask what warranties the facility offers on their workmanship and the parts they use. Warranties vary between repair shops, so be sure to ask about the warranty in advance.
Ask people you trust who live in your vicinity for car repair shop recommendations. Be sure to include those who have a vehicle in the same class as yours.
Educate yourself about the local auto shops by visiting their sites and others. Search “mechanic shop near me”, “toyota mechanic near me”, “auto mechanic near me”, “car mechanic near me”, “auto repair shops near me”, “auto repair near me.” Check a few through the BBB, Angie's List, the Mechanics Files at Cartalk.com, Consumer Reports, customer reviews, etc.
You might find shops that you like, but they still may not make the best sense for you because their hours don’t fit your schedule or the location is too far.
Start with a small task like an oil change or replacing spark plugs as an introduction to your new auto repair facility before you use the shop for bigger kinds of auto repairs.
Ace Auto is a family-owned and operated auto repair shop. We are fast, friendly, reasonably priced, and reliable, and we always keep our customers informed throughout the entire process. We do not do any work without their consent. All our mechanics are ASE Certified and maintain continuous training in current high-tech vehicle systems. All our work is guaranteed!
Ace Auto Repair management and our entire service team wants to thank all of our customers here in West Jordan and throughout southern metro Salt Lake City. We appreciate your trusting us with your auto repairs and maintenance for the past 11 years.
As owners of a small business in Utah, we’re grateful for the support of our community as we have worked to build our business. We’ve run our auto repair shop according to our personal values, and we’re very proud of our team here and the service we provide our customers. We are committed to providing every vehicle owner with the highest quality of workmanship, a fair price, and the best personal service in our region.
Small Business Saturday: Of course, when you choose Ace Auto Repair and other small businesses, you’re helping strengthen the West Jordan’s community. For example, doing business with a small local company:
Helps create local jobs
Over 30 million small businesses throughout the U.S. employ more than 47% of the nation’s workforce.
Grows the local economy
|Local business tax revenues are put back into the community.|
Helps promote an excellent local service culture
|Small business operators and their staff are known for taking time to provide a better experience for customers.|
Increases charitable giving from your town
|Local businesses donate more than 200% above the rate big businesses give to local charitable causes.|
Promotes local innovation
Smaller teams outperform large competitors with better custom solutions to meet customers’ individual needs.
Helps a successful local population
Spending at local businesses helps local entrepreneurs reach their goals, which helps develop a successful community.
As a small auto repair service business customer, you also personally receive many essential advantages that big national chain branches cannot deliver as well. For example:
As a local auto maintenance and repair provider, Ace Auto Repair management and our employees take great pride in our service facility’s reputation for quality work at fair prices. Every auto mechanic in our shop must earn ASE Certification and stay up to date on new industry technologies for a wide range of modern high-tech vehicle operating systems.
Your car AC compressor is designed to pressurize the refrigerant that is running through the air conditioner. That’s what makes your car’s AC system produce cool air. To keep the refrigerant flowing through the AC system, and keep it under pressure, and at a high temperature, the AC compressor must work properly. But, naturally, AC compressors eventually need repair or replacement. Here we’ll look at the most common symptoms of a broken AC compressor.
The AC compressor compresses the vapor of the air conditioner refrigerant to convert it from its low-pressure state into a high-pressure gas. Under high pressure, the high temperature of the gas causes it to circulate and release cold air. Because of the refrigerant circulating through the vehicle’s air conditioning system in this state, the air coming from the air conditioner’s dashboard vents is cold when the AC is turned on.
Of course, as with any other working part on a car, the AC compressor goes through a lot of wear and tear over time and, at some point will need repair or replacement. The AC compressor will show signs that a repair is needed, which will help you figure out what is wrong.
If you find your vehicle’s AC not cooling the inside of your car, that is typically a symptom of a bad AC compressor. A damaged or worn-out compressor can no longer regulate refrigerant flow as necessary for normal functioning, so the air conditioner does not cool properly. You may find your car AC blowing hot air. Or, you may find very little or no airflow at all coming from the AC vents when the AC is turned on. These are signs that the AC compressor is no longer functioning and needs to be replaced.
A loud rattling noise coming from your car’s air conditioner when it is turned on is a symptom of a problem with the AC compressor. The compressor consists of an assembly of various component parts. If one or more parts break, the unit may make a clattering noise. Often a broken AC compressor will try unsuccessfully to turn off and on. The best solution to this problem is to replace the AC compressor rather than attempt to repair it.
If there is fluid leaking from your AC compressor, that is an indicator of a malfunction in the part. The AC compressor has bearings inside that stop fluid from leaking out. When the bearings are damaged or become worn out from long-term use, fluid can leak from them. Refrigerant leaking from an automobile AC compressor can cause the air conditioner to stop working. It can also present a potentially serious health risk. So, as a priority, while looking for signs of an AC compressor problem, check to be sure the system has refrigerant still in it.
When the clutch of an AC compressor is not moving, that is a sure sign of a problem with that auto part. The clutch enables the AC compressor to draw power from your car’s engine only when needed to run the AC. If the clutch is seized up, it cannot keep the compressor engaged continuously. If the clutch is broken, the compressor can’t receive power from the engine.
To keep your car cool and comfortable in hot weather, the AC refrigerant must continue to flow without disruption through the car’s AC system. It must remain consistently under high pressure and at high temperature to keep your AC blowing cold air. Your car’s AC compressor must be properly maintained for these conditions to stay in balance.
That includes keeping the AC drive belts clean and in good condition. Additionally, you should run your vehicle’s air conditioner for a minimum of ten minutes once each week to circulate the fluids and keep the gas from the refrigerant inside the chambers of the AC unit.
If you live in the Salt Lake City, UT area and need to have your vehicle’s AC checked, we offer our region’s best auto maintenance and repair services. We provide a one-stop service facility for all your car care needs. See our services page and contact page for quick, transparent quotes. All Ace mechanics are ASE Certified and keep current with industry technology updates for modern high-tech vehicle systems.
Every vehicle must have a properly functioning water pump in order for the engine to operate. The water pump drives coolant through the radiator and sends it circulating through the engine. When it malfunctions, an immediate water pump car repair becomes necessary to get your vehicle back in drivable condition.
The water pump is responsible for maintaining engine and radiator temperatures within the acceptable range. To keep your car in reliable and safe operating condition, you need to take care of any maintenance matters your water pump requires as need arises.
There are numerous approaches to identifying water pump problems. For example, you may want to listen for unusual sounds coming from the pump, examine the belt and pulley, and check the thermostat. If the water temperature warning light is on, it may indicate that the coolant circulation in your car is insufficient, which may mean you need a water pump replacement. Or, one of a number of other checks may get you closer to discovering a problem with the pump.
Here are some of the most common problems that cause issues with water pumps, to help you in troubleshooting diagnosis of your water pump issue, and in deciding whether you may need automobile water pump repair:
Look for signs of coolant leaking. Check under the front area of your vehicle. Look for any puddling of red, orange, or green fluid. Leaking coolant is often due to issues involving the water pump.
The water pump’s purpose is to circulate coolant in the vehicle’s engine block and heads. When a water pump breaks down, it can no longer circulate engine coolant as it’s designed to do. When the coolant is not circulating as necessary to keep the engine cool, the temperature in the engine rises to an extreme degree, and the engine becomes overheated. An overheated engine is an urgent problem, requiring immediate attention to prevent potentially serious engine damage, including burned-up pistons, and split cylinder heads.
Slow leaks can cause a wet area around the water pump. Check for engine coolant leakage in the area around the pump. Look for rust in the area too. Rust is not uncommon around the water pump when fluid is leaking. Gradual leaks usually don’t cause engine breakdowns very quickly, but they do cause coolant levels to drop. This reduces the amount of lubricant that protects the water pump’s working parts, which are in constant motion while the engine is running, and it promotes wear on the pump.
When your water pump is working properly, your engine will maintain a steady temperature range. If you notice steam coming up from your car hood, this indicates that your engine is extremely overheated due to insufficient coolant circulation and needs emergency attention. Turn off your engine immediately when you see steam coming from the engine. Do not ignore the problem, and don’t try to continue driving the car any farther toward your destination, even if it’s just a short distance. Allowing the vehicle to keep running can cause the need for engine rebuilding or replacement. Driving with an engine that is extremely overheated is also very dangerous.
A number of things can cause a belt to become loose. If your engine is making a loud squeaking noise, this may indicate a loose belt on the pulley that drives the water pump. Check to ensure that the water pump belt fits snugly in its proper position. Have a loose water pump belt adjusted or replaced promptly. Or, if the noise becomes more intense while you’re driving the vehicle, then the water pump may need to be replaced.
The vehicle’s water pump is responsible for coolant moving in your engine and radiator. Water pumps and fan belts often function in conjunction with one another, which involves impellers that circulate water through the engine. The main purpose of this system is to control engine temperature and prevent the buildup of excessive heat. Too much heat in the engine can lead to serious issues, including damage to pistons, or a crack in the block and/or heads, throwing a rod because the oil fails, and other extreme consequences to your engine parts.
We specialize in repairs of all makes and models of cars, trucks, vans, and SUVs. Our mechanics are ASE Certified, which means they go through continuous training to stay current with high-tech systems in the latest model vehicles of all types. We offer affordable auto repair services and we provide repair estimates in writing.
Ace is a family-owned and operated business. We take pride in our fast, reliable, friendly, and honest service to our customers throughout the greater Salt Lake area. All our work is guaranteed!
For answers to your questions or to schedule an appointment for a diagnosis and/or repair, call Ace Auto Repair, West Jordan UT at (801) 803-6016, or use our online contact form to request an appointment.
In light of the spreading coronavirus, Ace Auto is taking further precautions to protect our clients and the expert team. To avoid any unnecessary risk of exposure to the virus, our team is checked daily for temperature or signs of illness to be sure they are well before they work with customers. Our lobby and entrance is repeatedly cleaned and sanitized and we have integrated additional hand washing and sanitizers.
We understand the importance of keeping your vehicles running smoothly and are extremely diligent in protecting the safety of our customers, and team members. Please reach out to us if you have further questions or needs at this time.
We anticipate continuing this policy as long as needed and are committed to providing a high quality service to all of our customers. We encourage you to contact us if you have any questions or concerns.
We appreciate your business and support!
If you’ve ever had grinding gears automatic transmission problem or you’ve experienced manual transmission grinding in 3rd gear, you’re not alone. This is a very common gear issue, but it's important to be educated on the problem to keep your car or truck in the best condition possible. Keep reading to learn more about the grinding gears meaning, including how to fix grinding gears, and who you should contact for top-notch automotive care.
In simple terms, gears grinding stems from the speed of your wheels and engine not being on the same page. This mismatch in speed can cause a very troubling grinding noise. In order for the next gear to change in your gearbox, the shafts for both input and output should move at the same speed. In modern vehicles, synchro rings help these parts to move at the right speeds, which is why this issue is less common. But in older vehicles or in gearboxes used in American semi-trucks, these rings aren’t utilized. In order to limit grinding gears, semi-truck drivers match the speed by pressing down on the throttle to increase engine revs on downshifts, then waiting for the RPMs to drop when shifting up. This is a very difficult skill to master, but semi-truck drivers do this very well.
Although manual transmission vehicles can be very beneficial, they are less common today than they used to be years ago. Manual transmissions were a hot commodity due to the fact that they typically cost less and allow for a few more miles per gallon. But as the technology and simplicity around automatic vehicles have been on the rise, manual transmissions are far less common.
Due to the design of manual transmissions, the system is more distinct for selecting gear ratios and matching those with the engine and wheels. When you shift into a different gear, the gears are being coupled with the input and output shafts of your transmission, which creates a proper gear ratio adjustment. As the gear shift is made, a collar slides over the end of the gear. When you hear a grinding sound, this happens because that collar that is colliding with the end of the gear is spinning at a slower or faster rate compared to the shaft in your transmission. To limit this grinding sound, a synchronizer ring is used to match these speeds effectively. But if you constantly hear a grinding noise, this could mean that the part isn’t working correctly or that you don’t have enough transmission fluid.
Automatic transmissions work similarly to manual ones, but the key difference is that the car shifts gears automatically based on preset RPM settings. However, while grinding sounds are more common in manual cars, automatic transmission grinding when shifting can still happen. To limit the automatic transmission problems shifting gears, it’s best to consider the following:
Whether you’re dealing with an automatic transmission not shifting into high gear or any other automotive problem, Ace Auto Repair is here to help! We can diagnose the transmission problem and have it working perfectly in no time! Call us today to work with our fast, friendly, and reliable team!
Without our vehicles, it would be nearly impossible to go to work, take the kids to school, go to the grocery store, and complete many other important tasks. But even if you own a vehicle, it's vital to make sure it stays in good health. The unfortunate truth is, many things can happen to our precious rides—and knowing how to fix issues might be extremely difficult. One of the leading problems we’ll discuss today involves the clutch of a vehicle. This is a vital component to your car or truck, and knowing when it’s failing and needs to be replaced can go a very long way. In this post, we’ll talk about 5 clutch symptoms that you should pay attention to right away.
One of the leading signs of clutch failure is when it feels soft. When you depress the pedal of the clutch, there should be some resistance felt. Given how the clutch itself is a heavy spinning disc constructed of metal and springs, this shouldn’t be very easy to move. If you press down on the pedal and it is very easy and soft like butter, then that means your clutch could be nearing the end of its days.
When you try to put your car in reverse, the engine power in the crankshaft is sent in the opposite direction of what it’s used to. That leads to the common “clunk” sound and you might also feel a clutch vibration when shifting. This causes a lot of force from the clutch, which might lead to the component breaking down over time. If your car struggles to find the reverse gear, then you’re experiencing one of the more common signs of clutch problems and solutions are very possible.
If you hear strange noises when you’re engaging or disengaging your clutch pedal, then this might mean that your clutch is beginning to wear out. More specifically, this is typically due to a worn-out clutch fork. This is a hydraulic or mechanical releasing device that helps the clutch function properly. However, you could be dealing with a clutch fluid evaporate problem if there is no more fluid in the clutch fork. Take your car to an auto shop to help with this issue.
Another common clutch problem is when the clutch pedal sticks to the floor. This means that you have binding issues with the linkage or release bearing. To help this problem, make sure the springs in the linkage aren’t over-stretched. If they are, they may need an adjustment. Another tip is to check the release bearing and make sure the pedal stop is in the correct place.
A lot of vehicle owners complain that they have issues with their clutch after cold weather. This is because cold weather can cause your system to contract, and extreme contraction can cause your clutch master cylinders to fail. Another issue is freezing fluid. Now you may be wondering, “can clutch fluid freeze?” And that answer is yes, but it's very rare and only happens in very extreme weather or when water gets into the clutch line.
Whether you’re dealing with a clutch overheat problem or anything else with your ride, Ace Auto Repair is here to help. Stop searching for “clutch repair shop near me” and pick up the phone and call the most reliable team in the area!
Many people depend on their vehicle to get them from place to place such as running errands around town, going to school, and going to work. Like any other machine, a car can have problems from time to time and people might realize that they need to make repairs on their car. When they are told their car needs to be repaired, they might not be prepared for the cost. Maybe they assumed that insurance would cover all of the costs or perhaps that did not think that anything serious was wrong. The cost of these repairs can be difficult for a family to bear. They might be thinking about saving money by putting on aftermarket car parts. It is important for everyone to understand what are aftermarket car parts. People might also be asking are aftermarket car parts as good as OEM? Why not compare and contrast the two options?
OEM stands for original equipment manufacturer and people might be wondering where to buy OEM car parts. Typically, a dealership is going to work with OEM parts. These are parts that have been made both by and for the vehicle itself. They are meant to work like the original parts in the vehicle and might let the vehicle function better. Some of the other benefits of working with OEM car parts is that they are easy and simple to choose. Quality is guaranteed since they are made for the vehicle. Finally, most of these parts also come with a warranty on the parts.
On the other hand, OEM parts are also typically more expensive than their aftermarket counterparts. They are typically also more expensive since they have been made directly by the manufacturer and often are brand new.
Some people might elect to take their car to an independent dealer. Here, the dealer will be working with aftermarket parts. These parts are similar; however, they have not been made specifically for the vehicle itself. Therefore, it is important for everyone to know a little bit about aftermarket car parts. Some of the benefits of aftermarket parts is that they typically have a lower cost, thus the name aftermarket. Depending on the purpose of the parts and the vehicle, these parts actually might work a little bit better because of the variety. With more variety, there is more functionality, contributing to a wide range of quality.
Of course, this range also means there is a bit of an unknown factor. They might not work well at all. People can also be overwhelmed by the options and might not know where to start. Finally, these parts rarely come with a warranty. People take on a lot of risk by going with aftermarket car parts.
When it comes to vehicle repair, trust the professionals to do it right the first time. If your vehicle needs repairs, call Ace Auto Repair or visit our website to learn more! We are proud to provide services on cars, trucks, SUVs, and more in West Jordan and the greater Salt Lake City, UT area. We will keep you informed during the repair process and will be as honest and transparent as possible. Call us today!
Many times when someone asks how to save fuel, the first answers they get are suggestions on how to get around without a motor vehicle of their own, such as biking, walking, or using public transportation. While sometimes these suggestions are helpful, other times making these changes are too drastic of a blow on a person's lifestyle. What they really need to know is how to save gas while driving. Fortunately, there are ways that this can be achieved.
If you go to work with a headache or a cold, chances are you'll start feeling drained before the day is done. The same goes for your car. Any vehicle is going to get its best gas mileage if it is working as well as it possibly can. Automakers may advertise excellent gas mileage, but if the vehicle isn't working properly, it will use more gas just to function.
Pay attention to things like the check engine light, and make sure that the tires are staying properly inflated. Don't seek to own a vehicle with a more powerful engine than you really need. In addition to reducing fuel economy, ignoring problems also increases emissions that at harmful to the environment. Not keeping up with basic maintenance may also lead to greater repair costs in the long run.
If you're a "crazy driver" don't be surprised to see crazy bills at the pump. Aggressive driving has been known to lower fuel efficiency by close to a third.
Driving the speed limit is actually a practice that can save fuel, as fuel economy starts to dwindle past 50 mph. Too much braking and sudden acceleration can be hard on efficiency as well, as it can burn as much as a half-gallon of fuel in a single hour.
One of the biggest waves to save fuel is to make sure that when you are driving, you are moving as much as possible. That means limiting the amount of time you leave your car idling. The Department of Energy suggests not having your vehicle in the park for more than 10 seconds, if possible.
The more fully you have to start and stop at traffic lights, the more fuel you will use, and the harder you will be on your car. Coasting to slow speed before braking will make things easier. When roads are good, cruise control can be a helpful fuel-saving tool, although it is not a good option for slippery roads.
Climbing into a nice cool car on a hot day might feel good, but if you are looking to save gas money, too much air conditioning isn't necessarily the best way to go. Cooling the car by opening windows is a more fuel-efficient alternative.
There are a lot of vehicles on the market that are designed for great fuel efficiency, but how your drive and take care of your vehicle are just as important as choosing the best vehicle you can. For most people, it's all they can do to do the best they can with what they've got.